11N Wireless Broadband Router
28
access to your ISP network. Click “Open Scanner’
to search the available SSID.
¾
MAC:
Enter the MAC address of ISP wireless device.
Click “Open Scanner’ to search the MAC address.
¾
Channel:
Wireless device’s communication
channel. Keep it the same channel with your ISP’s
wireless device. Click “Open Scanner’ to search the
available AP channel.
¾
Security Mode:
If your ISP has set the security
parameters, the receiving station must set the
same security mode, encryption method and key
with ISP’s device.
If you know the ISP wireless device’s SSID, enter the
SSID, Wireless MAC address, Channel and Encryption
method into the corresponding fields. Certainly you can
click the “Open Scanner” button to fill these fields
automatically. After you apply the settings, In “Setup
Wizard” page select the corresponding WAN connection
type to connect the Internet. For example: If your ISP
wireless device provides Dynamic IP access type, you
need to select “Dynamic IP (Via DHCP)”.
