Tendercare Ltd
The Snugseat Spring User Manual
Document No 034-01v4 Snugseat Spring
User Manual.doc
Authority.
Quality Controller
Authorised.
J Adams
Page 20
Dec 05
7.4 Lifting and general safety
1) The Snugseat is designed to carry one person only. Never allow children to play on, or
stand on the footrest or frame. Never hang anything such as bags on the push handle. If
you do, there is a danger of the Snugseat tipping backwards.
2) If it is necessary to lift the Snug Seat whilst it is occupied always use two people, one
either side of the Snugseat.
3) For your own safety and good practice never lift the empty Snugseat until it has been
properly folded. Always use good lifting practice.
4) Do not allow children to play with the gas spring release lever.
8. Cleaning
8.1 Buggy and seat shell.
1) To clean the buggy or seat shell, wipe with a damp cloth and dry thoroughly.
2) For more stubborn stains wipe with a damp cloth and warm water in which a little mild
soap has been dissolved. Dry thoroughly
3) Never use furniture polish or any spirit to clean the frame.
8.2 Patterned covers & tummy pad.
1) Remove the cover from the Snugseat. Remove the harness from the cover. Wash as per
instructions on the cover (40°C Synthetic Wash).
2)
Dry cover thoroughly before re-assembly.
Do not tumble dry
.
8.3 Modular foam pads
1) Make a sketch or take a photograph of the position of foam pads.
2) Remove foam pads that need cleaning.
3) Wipe with a damp cloth and dry thoroughly.
4) Using the sketch or photo, refit the pads in
exactly the same position
.
8.4 Five point harness
1) Remove harness from the seat.
2) Wipe with a damp cloth and dry very thoroughly.
Do not tumble dry.
3)
Do Not immerse in water or wash in a machine.
9. Maintenance
Should a problem be found when carrying out the regular checks, it should be immediately
reported to the issuing authority or Tendercare Ltd.