Snappi System User Manual
Document No: 053-05 v38
Page 23 of 76
June 2022
Snappi System User Manual.doc
Finally, fold the footrest, and tuck it in using
the knee angle adjustors as shown (see
section 5.1.2 for details).
Fig 4.5.3
4.6 Folding as a 2 part system (all models)
– Including rearward facing model
Fig 4.6.1
To fold the system as a 2 part, first set the
seat back angle to 90
o
(see section 5.1.3),
remove the seat and fold the frame as
detailed in section 4.1.
Next place the seat, face down over the
folded chassis as shown.
Finally, fold the footrest tray and angle the
footrest tubes to sit closer to the seat (see
section 5.1.2 for how to adjust and fold the
footrest).
5.0 Setting up the seat unit
When setting up the seat unit always ensure the following is done:
•
Always consult your Therapist or Rehabilitation Engineer for advice.
•
Ensure that the child is relaxed and happy and if possible in an environment in
which they are familiar.
•
If possible, sit the child on a plinth to take the measurements listed below:
Measurement
Number
(see fig 5.0.1)
Millimetres
Top of head to seat
1
Under armpit to seat
(Axilla height)
2
Actual sitting depth
3
Chest Width
(Arm pit to arm pit)
4
Hip width
5
