Snappi System User Manual
Document No: 053-05 v38
Page 28 of 76
June 2022
Snappi System User Manual.doc
Finally, secure the laterals by screwing the
provided hand wheels onto the protruding
threads of the coach bolts (see Fig 5.1.4.5).
The position of the laterals can be adjusted
laterally by loosening the hand wheels and
sliding them in or out to the required width.
They can be adjusted vertically by sliding up
and down the mounting slots
‘H’(see fig
5.1.4.3). There is a partition in the slots
between the upper and lower back plates.
To achieve the full adjustment range, the
laterals need to be fitted in the appropriate
section of the slots.
Fig 5.1.4.5
5.2 Fitting and Removing The Covers
Fig 5.2.1
To remove the seat pad:
Simply lift the front edge of the seat pad to
separate it from the Hook & loop strip on the
base.
To remove the hip guide covers:
The cover hooks around the front of the hip
guide plate. To remove, lift and rotate the
cover from the rear as shown, and then
unhook the cover from under the front of the
hip guide plate.
Fig 5.2.2
