www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <2>
V1.0
23/08/18
Please read this manual before operating the equipment.
Keep manual in accessible place for future reference.
What’s Included
Control Unit
1 No.
Soldering Iron
1 No.
Soldering Iron Holder
1 No.
Nozzle
1 No.
Bracket
1 No.
Power Cord (UK + EU)
2 No.
Cleaning Sponge
1 No.
User Manual
Safety Precautions
• This product is meant for use by trained and qualified personnel only. Keep away from children
• Do not dis-assemble the control unit. There are no user serviceable parts
• Do not use the rework station in the vicinity of flammable material
• Use appropriate safety gear and exercise caution while using this rework station
• Do not touch the soldering tip or hot-air nozzle as the temperature can be 200°C to 400°C when in use
• Please pay attention to the specifications of the power supply and use proper power cord
• For changing the soldering tip, ensure that the power supply is turned off and allow sufficient time for the tip to cool down.
• The soldering tip should be cleaned by wiping it on the cleaning sponge provided. This will help get rid of the burnt solder
or fluxes that cause oxidation on the soldering tip. Not cleaning the tip might lead to improper soldering.
• Never use it as a hair drier and touch the heating element or blow the skin directly
• Don’t operate with wet hands or wet wire in order not to result in short circuit or electronic shock
• Please use the nozzle offered by manufacture and don’t replace the original nozzle
• Temperature will vary from the models of the nozzles, which is normal
• Don’t use this device to do other work except soldering
• Don’t rap the handle to remove the doss of tip, which is bad for it
• Don’t pull the cable but hold tightly the plug when you take out of plug
• Please keep good ventilation because there is smoke when solder
Specifications
Input Voltage
220V AC 50Hz
Total Power
900W Max.
Air heating: 800W Max, Pump: 40W
Soldering Iron: 50W
Temperature Range
Hot Air Rework Station
100°C to 500°C
Soldering Station
200°C to 480°C
Temperature Unit
°C / °F
Convertible
Temperature Controlling Stability
Static
±2°C