6
Nozzle
Transmits heat for
melting solder.
Filter Pipe
Traps vacuumed solder from
rework piece using included
filter
Back Holder Assembly
Secures the filter pipe.
Heating Element
Trigger
Squeeze to start absorption.
Do not press when nozzle is not
fully heated up.
Release Knob
Push down to remove
the filter pipe.
Pressure Indicator
Indicates when the nozzle
and heating element need
cleaning and when the
filters need replacing.
Cord Assembly
Connects to the receptacle
(station).
Vacuum Tube
Connects to the vacuum cover
(station).
PARTS GUIDE
7
OPERATION GUIDELINES
I.
Connections
1.
Connect the cord assembly of the Desoldering Gun to the
receptacle .
2.
Connect the tube to the vacuum outlet cap.
3.
Connect the power cord.
NOTE:
●
Confirm that the power switch is set to “
OFF
”, before connecting the
power plug to the power supply
●
Check if the
indicator light
lights up when you turn the unit
“ON”.
●
The suction nozzle begins to heat up as soon as the
desoldering switch is turned on.
●
After turning the switch to
“ON”
, wait for a few minutes
(
until
suction nozzle fully heats up)
before beginning desoldering
operations.
Fully insert the vacuum
tube in the vacuum
outlet cap.
Insert the cord
assemble
by
keying the plug
to the key on
the receptacle.
Secure the plug by
turning it clockwise.
