black red
(figure 4)
To measure DC or AC Voltage, connect the Meter as follows:
1. Insert the red test lead into the HzV
Ω
terminal
and the black test lead into the
COM
input terminal.
2. Set the rotary switch to an appropriate measurement
position in V or V range.
3. Connect the test leads across with the object to be
measured.
The measured value shows on the display.
Warning
Never attempt an in-circuit current measurement
where the open circuit voltage between terminals
and ground is greater than 250V .
If the fuse burns out during measurement, the Meter
may be damaged or the operator may be injured.
Measurement Operation(2)
Model 72-7930: OPERATING MANUAL
15
Summary of Contents for 72-7930
