www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <2>
V1.0
07/05/18
Thank you for purchasing the TENMA Soldering station. Please read this manual before operating the equipment.
Keep manual in accessible place for future reference.
What’s Included
Control Unit
1 No.
Soldering Iron
1 No.
Soldering Iron Holder
1 No.
Power Cord (UK or EU)
1 No.
Cleaning Sponge
1 No.
User Manual
Safety Precautions
•
This product is meant for use by trained and qualified personnel only. Keep away from children
• Do not dis-assemble the control unit. There are no user serviceable parts
•
Do not use the soldering station in the vicinity of flammable material
• Use appropriate safety gear and exercise caution while using this soldering station
• Do not touch the soldering tip as the temperature can be 200°C to 400°C when in use
• User proper power cord
•
For changing the soldering tip, ensure that the power supply is turned off and allow sufficient time for the tip to cool down.
• The soldering tip should be cleaned by wiping it on the cleaning sponge provided. This will help get rid of the burnt solder or
fluxes that cause oxidation on the soldering tip. Not cleaning the tip might lead to improper soldering.
•
Specifications
Input Voltage
220V AC ±10% 50Hz
Plug Type
UK, EU
Power Consumption
80W (Max.)
Temperature Controlling Range
150°C to 450°C (302°F to 842°F)
Heater Voltage
24V AC
Temperature Stability
±1°C (Static)
Display
LCD
Max. Surrounding Temperature
40° C
Calibration Method
Digital
Temperature Range for Calibration
50°C to -50°C (122°F to -58°F)
Ground Impedance
< 2Ω
Ground Voltage
< 2mV
Heating Element
4 Core
*Specifications are subject to change without prior notice.
