4
INTERCHANGEABLE SOLDERING TIPS
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste
Electrical & Electronics Equipment (WEEE). Any WEEE marked products must
not be mixed with general household waste, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your local authority for details
of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0
•
Always turn the power off when removing or inserting a tip.
•
Allow the soldering tip to cool down to room temperature.
•
Unscrew the retaining nut and remove the outer sleeve.
•
Pull off the tip and replace with a new soldering tip.
•
Reassemble in reverse sequence.
REPLACING SOLDERING TIPS
•
A range of varying diameter and shaped replacement tips are available.
•
See our website or printed catalogue for part numbers.
