www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com
TM
TM
Page <4>
V1.0
12/04/13
Rework Station
Instruction Manual
Care and Safety Precautions:
Caution
Improper usage can cause injury and physical damage. For your own
safety, please observe the following precautions.
• Temperature may reach as high as 480°C when turned on.
Do not use the device near flammable gases, paper and other flammable materials.
Do not touch heated parts, which can cause severe burns.
Do not touch metallic parts near the tip.
• Thermal Protector
Unit is equipped with auto shutoff ability when temperature gets too high and automatically turns on when
temperature dropped to a safe level.
• Handle with Care
Never drop or sharply jolt the unit.
Contains delicate parts that may break if unit is dropped.
• Disconnect the plug from the power source if the unit will not be used for a long period.
Turn off power during breaks, if possible.
• Use only genuine replacement parts.
Turn off power and let unit cool before replacing parts.
• The unit may produce a small amount of smoke and unusual odor during first usage. This is normal and should
not yield any negative result when reworking.
• Soldering process produces smoke, use on well ventilated place.
• Do not alter unit, specifically the internal circuitry, in any manner.
