16
3.
Remove the old fuse from its holder by gently pulling it
out.
4.
Install the new fuse into the holder.
5.
Always use a fuse of the proper size and value
(0.2A/250V fast blow for the 200mA range, 10A/250V
fast blow for the 10A range).
6.
Put the fuse door back in place. Insert the screw and
tighten it securely.
WARNING
: To avoid electric shock, do not operate your
meter until the fuse door is in place and fastened securely.
INFORMATION ON WASTE DISPOSAL FOR
CONSUMERS OF ELECTRICAL & ELECTRONIC
EQUIPMENT.
When this product has reached the end of its life it must be
treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked products must not be mixed with general
household waste, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your
local authority for details of recycling schemes in your area.
Made in China PR2 9PP
PO Box 13362 Dublin 2