Digital Multimeter
Page <21>
20/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
The POWER button
This is a self-lock switch use to turn on or off the power of the Meter.
The BLUE button
It uses for selecting the required measurement function when there is more than one function at one position of the rotary switch.
Turning on the Display Backlight
Warning
In order to avoid the hazard arising from mistaken readings in insufficient light or poor vision, please use Display Backlight function.
••
Press and hold
HOLD
for over 2 seconds to turn the Display Backlight on.
••
Pressand hold
HOLD
again for over 2 seconds to turn the Display Backlight off, otherwise it will stay on continuously.
Sleep Mode (Model UT60C)
To preserve battery life, the Meter automatically turns off if you do not turn the rotary switch or press any button for around 30
minutes.
To disable the Sleep Mode function, press BLUE button while turning on the Meter.
General Specifications
Maximum Voltage between any Terminals and Grounding
: 1000V.
Fused Protection for
µµ
AmA
Input Terminal
: Glass fuse, 0.5A, 250V, fast type, Ø5 x 20mm.
Fused Protection for
µµ
AmA°C
Input Terminal
:
Model
UT60C Glass fuse, 0.5A, 250V, fast type, Ø5 x 20mm.
Fused Protection for
10A
Input Terminal
: /C/E: Glass fuse, 10A, 250V, fast type, Ø5 x 20mm.
Maximum Display
: Digital: 3999
Measurement Speed
: Updates 3 times/second.
Temperature: Operating
: 0°C to 40°C (32°F to 104°F).
Storage
: -10°C to 50°C (14°F to 122°F).
Relative Humidity
:
≤
75% at 0°C - 30°C; 50% at 31°C - 40°C;
Altitude: Operating
: 2000m.
Storage :
10,000m.
Battery Type
: One piece of 9V (NEDA1604 or 6F22 or 006P).
Battery Deficiency
: Display
Dimensions (H x W x L)
: 177 x 85 x 40mm.
Weight
: Approximate 300g (battery included).
Safety/Compliances
: IEC61010 CAT.III 1000V, CAT.IV 600V overvoltage and double
insulation standard.
Certifications
: CE, UL and CUL