![background image](http://html1.mh-extra.com/html/tennant/242e/242e_operators-manual_1087006038.webp)
OPERATION
242E MM243 (5---92)
2-24
6. Push the scrub attachment into place so the lift
pins on the scrub attachment line up with the
pin slots on the lift arms. Push the lift arm
hooks over the pins.
A
B
02752
LIFT ARM HOOK
A. Pin
B. Hook
7. Start the machine and raise the scrub
attachment slightly.
8. Pull out the locking knobs on the two (2) front
support legs, swing the legs up and release the
knobs.
9. Lower the scub attachment.
10. Lower the front bumper.
11. Raise the scrub attachment. Engage the
hopper support bar. Turn off the machine.
WARNING: Raised Hopper May Fall.
Engage Hopper Support Bar.
12. Pull out the locking knobs on the two (2) rear
support legs, swing the legs up and release the
knobs.
A
B
02754
SCRUB ATTACHMENT LEG
A. Locking Knob
B. Support Leg
13. Loosen the scrub locking cam on the right lift
arm, and rotate it snug against the bracket on
the scrub attachment. Tighten the cam bolt.
14. Check to see that the solution recovery hose is
mounted in the debris trough.
15. Start the machine and raise the scrub
attachment. Place the hopper support bar in its
storage location and lower the scrub
attachment.
16. Slide the side brush squeegee assembly into
position in the squeegee bracket.
17. Slide the two squeegee retaining pins through
the bracket and squeegee assembly.
Summary of Contents for 242E
