![background image](http://html1.mh-extra.com/html/tennant/242e/242e_operators-manual_1087006066.webp)
MAINTENANCE
242E MM243 (5---92)
3-26
TO INSTALL HOPPER DUST FILTER
1. Place the cleaned or new dust filter in the
hopper dust filter frame with the arrows
pointing up.
A
B
02464
INSTALLING DUST FILTER
A. Dust Filter
B. Dust Filter Frame
2. Position the shaker frame on top of the filter
frame.
3. Replace and tighten the shaker frame nuts.
4. Position and secure the hopper cover on the
hopper with the cover latches.
HOPPER FUSIBLE LINK
The hopper fusible link is a device which, in case of
fire in the hopper, allows the hopper fire door to
close, cutting off air to the fire.
The fusible link is positioned between the hopper fire
door and the hopper cover. It is mounted inside the
hopper cover. Check the fusible link after every 100
hours of operation.
If loss of dust control is noticed, check the fusible
link for breakage or failure due to heat.
TO REPLACE HOPPER FUSIBLE LINK
1. Turn off the machine and set the machine
parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine And Remove Key.
2. Open the hopper cover and turn the cover
upside down.
3. Remove the existing pieces of fusible link and
their retaining hardware.
4. Slide a new fusible link over the link mounting
pins and mount with the retaining hardware.
5. Open the fire door.
6. Place the fire door hook over the middle of the
fusible link.
7. Put the hopper cover back on the hopper.
Summary of Contents for 242E
