MAINTENANCE
242E MM243 (5---92)
3-36
HOPPER SEALS
The hopper seals are located on the top and side
portions of the machine frame which contact the
hopper. They seal the main brush compartment.
The seals should be inspected for wear or damage
after every 100 hours of operation.
A
B
C
02457
HOPPER SEALS
A. Side Seal
B. Seal Retaining Strip
C. Top Seal
HOPPER INSPECTION DOOR SEAL
The hopper inspection door seal is located on the
hopper inspection door on low dump model
machines. It seals the front of the debris
compartment.
The seal should be checked for wear or damage
after every 100 hours of operation.
A
B
02480
HOPPER INSPECTION DOOR SEAL
A. Hopper Inspection Door
B. Door Seal
HOPPER DOOR SEALS
The hopper door seals are located around the
hopper door opening on multi-level dump model
machines. They seal the hopper door.
The seals should be checked for wear or damage
after every 100 hours of operation.
A
B
C
02481
HOPPER DOOR SEALS
A. Seal
B. Hopper
C. Hopper Door
HOPPER COVER SEAL
The hopper cover seal is located on the top edges of
the hopper. It seals the hopper filter compartment.
The seal should be checked for wear or damage
after every 100 hours of operation.
Summary of Contents for 242E
