![background image](http://html1.mh-extra.com/html/tennant/242e/242e_operators-manual_1087006086.webp)
MAINTENANCE
242E MM243 (5---92)
3-46
4. Pull out the clevis pins and remove the rear
squeegee assembly from the machine frame
and squeegee lift linkage.
A
B
A
B
05351
REMOVING REAR SQUEEGEE
A. Clevis Pins
B. Detach Squeegee Here
5. Remove the retaining strips and screws holding
the front and rear squeegee blades on the
squeegee assembly frame.
6. Remove the back-up strip and then the rear
squeegee blade. Remove the front squeegee
blade.
7. Replace or rotate the squeegee blades. Place
the back-up strip over the rear squeegee blade.
8. Position the retaining strips over the front and
rear squeegees. Mount the squeegee blades
with the retaining screws.
9. Place the rear squeegee assembly in the
machine mounting brackets and mount with
the clevis pins. Place the cotter pins in the
clevis pins to secure the assembly in place.
10. Mount the squeegee lift linkage to the rear
squeegee assembly with the clevis and cotter
pins.
11. Adjust the rear squeegee as described in
TO
CHECK AND ADJUST REAR SQUEEGEE.
Summary of Contents for 242E
