MAINTENANCE
3-47
242E MM243 (5---92)
TO CHECK AND ADJUST REAR SQUEEGEE
1. Start the machine.
2. Lower the squeegee and move the machine
forward on a level floor.
3. Turn off the machine and set the machine
parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine And Remove Key.
4. Check the squeegee. It should contact the floor
evenly side-to-side and deflect 0.75 in (20 mm)
for smooth floors, and 1.25 in (30 mm) for
rough floors. If not, continue with step 5.
A
B
03719
SQUEEGEE DEFLECTION
A. Squeegee
B. Deflection
NOTE: The squeegee blades must be new or have a
new wiping edge contacting the floor to correctly
adjust the squeegee.
5. To level the squeegee tips to the floor, adjust
the squeegee assembly at the squeegee links.
6. To adjust the amount of deflection, adjust the
down pressure of the squeegee assembly at
the rear squeegee position lever.
B
A
A
A
05351
REAR SQUEEGEE ADJUSTMENTS
A. Squeegee Tip Adjustment
B. Squeegee Down Pressure Adjustment
Summary of Contents for 242E
