MAINTENANCE
79
515SS MM419 (4--96)
SWEEPING BRUSH SIDE SKIRTS
The brush side skirts are located on both sides of
the sweeping assembly. Check the side skirts
after every 50 hours of operation for damage or
wear, and adjustment. The side skirts should be
just touching the floor, or 5 mm (0.125 in) off the
floor in dusty sweeping conditions.
SWEEPING REAR SKIRT
The rear skirt helps keep debris away from the
scrub brushes. The skirt is located behind the
sweeping main brush. Check the rear skirt after
every 50 hours of operation for damage, wear, or
adjustment. The rear skirts should clear the floor
by 5 mm (0.125 in).
DEBRIS HOPPER SLIT SKIRT
The debris hopper slit skirt helps direct debris into
the debris hopper. The skirt is located at the
bottom rear of the debris hopper. The rear lip of
the slit should always lie flat and contact the floor.
Check the skirt after every 50 hours of operation
for damage or wear.
