MAINTENANCE
550E MM149 (6--96)
3-14
DIRECTIONAL PEDAL
The directional pedal should be readjusted after
replacing one of the control components and
whenever the machine creeps when it is in the
“neutral” position.
Adjust the pedal, using the following illustration as
a guide. “Neutral” position should be set first. The
pedal overtravel in “forward” and “reverse” should
be about equal. The micro switches should have
0.005 to 0.015 in (0.13 to 0.38 mm) travel left
after the switches are energized. Use feeler
gauge to measure.
The “neutral” position of the pedal is set by
adjusting the stud between the two ball joints on
the control linkage and the centering springs
under the floor pan. After the pedal is centered,
apply Loctite 290 to the spring mounting bracket
to keep the spring position stationary.
NOTE: On a smooth level floor, the machine
should not “creep” in either direction when the
pedal is at rest (in neutral).
A
B
C
D
E
01150
DIRECTIONAL PEDAL POSITIONS
A. 0.005 to 0.015 in (0.13 to 0.38 mm)
B. “Reverse” Position
C. “Neutral” Position
D. “Forward” Position
E. 4.75 in (120 mm)
Summary of Contents for 550
