OPERATION
5700XP 331533 (9--06)
20
HOW THE MACHINE WORKS
The scrub components of the machine are a
solution tank, scrub brushes, a squeegee, a
vacuum fan, and a recovery tank.
Water and detergent, from the solution tank, flow
to the floor through a solution valve to the scrub
brushes. The brushes scrub the floor. As the
machine is moved forward the squeegee wipes
the dirty solution off the floor, which is then picked
up and drawn into the recovery tank.
The steering handles control the direction and
speed of the machine in forward or reverse. By
rotating the steering handles forward, the machine
propels forward. By rotating the handles towards
you the machine propels backward.
When using the ES mode, the dirty solution in the
recovery tank is filtered and returned to the
solution tank to be reused.
Three different widths of scrub heads and
squeegees are available for the machine, along
with two different brush types.
The scrub head widths are as follows; the model
700 (700 mm (28 in)), the model 800 (800 mm
(32 in)), and the model 900 (900 mm (36 in)). The
700 mm (28 in) squeegee is used with the 700
model scrub head, as well as the 800 mm (32 in)
with the model 800, and the 900 mm (36 in) with
the model 900. The two available brush types are
disk and cylindrical.
