MAINTENANCE
81
5700XP 331533 (9--06)
ADJUSTING THE SQUEEGEE GUIDE
ROLLERS
At each end of the squeegee are guide rollers to
guide the squeegee blade end along a wall.
Loosen the nut at the top of the guide roller and
move the roller in or out to adjust how close the
end of the squeegee blade comes to the wall. The
squeegee blade end should be further away from
the wall when the floor curves up into the wall.
SQUEEGEE BLADES
The squeegee has two squeegee blades, the front
and back. Each blade has four wiping edges. To
use them all, start with one wiping edge. To use
the next wiping edge, rotate the blade
end-for-end. To use the next wiping edge, rotate
the top edges down, bottom edges up. To use the
last edge, rotate the blade end-for-end.
Replace any worn or damaged squeegee blades.
REPLACING OR ROTATING THE REAR
SQUEEGEE BLADE
1. Make sure the squeegee is raised off the
floor.
2. Turn the machine power off and set the
parking brake if your machine has this
option.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, and turn off machine.
3. Loosen the two retention knobs, one at each
end on the squeegee.
