EN
ENGLISH
2
BR2020/T (04–98)
This manual is furnished with each new BR2020/T
Model. It provides necessary machine operation
and maintenance instructions.
Read this manual completely and understand
the machine before operating or servicing.
This machine will provide excellent service.
However, the best results will be obtained at
minimum costs if:
The machine is operated with reasonable care.
The machine is maintained regularly - per the
maintenance instructions provided.
The machine is maintained with manufacturer
supplied or equivalent parts.
MACHINE DATA
Please fill out at time of installation for future reference.
Model No.-
Install. Date -
Serial No.-
1998 Tennant Company Printed in U.S.A
TABLE OF CONTENTS
SAFETY PRECAUTIONS
3
. . . . . . . . . . . . . . . .
RECOMMENDED STOCK ITEMS
3
. . . . . . . . .
MACHINE COMPONENTS
4
. . . . . . . . . . . . . . .
CONTROL PANEL SYMBOLS
4
. . . . . . . . . . .
MACHINE INSTALLATION
5
. . . . . . . . . . . . . . .
MACHINE SETUP
6
. . . . . . . . . . . . . . . . . . . . . .
MACHINE OPERATION
7
. . . . . . . . . . . . . . . . .
CHARGING BATTERIES
9
. . . . . . . . . . . . . . . .
MAINTENANCE
10
. . . . . . . . . . . . . . . . . . . . . . . .
TRANSPORTING MACHINE
11
. . . . . . . . . . . . .
STORING MACHINE
11
. . . . . . . . . . . . . . . . . . . .
SPECIFICATIONS
11
. . . . . . . . . . . . . . . . . . . . . .
TROUBLE SHOOTING
12
. . . . . . . . . . . . . . . . . .
EC DECLARATION OF CONFORMITY FOR MACHINERY
(Directive 89//392/EEC,Annex II, sub A)
TENNANT N.V.
Address:
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden–The Netherlands
Model: BR2020, BR2020T nr.: 604778, 604777
– is in conformity with the provisions of the Machinery Directive ( Directive 89/392/EEC),
as amended, and with national implementing legislation;
– is in conformity with the provisions of the following other EEC directives:
– the following ( parts/clauses of) harmonized standards have been applied:
EN 292–1, EN 292–2, EN 294, EN 349, EN 563, EN 60204–1, EN 60335–1 ...
– the following (parts/clauses of) national technical standards and specifications have been used: NA
EN
Uden/Netherlands, 03–02–98
Stephan Martens – Technical Support Engineer
