OPERATION
6500 330270 (9--01)
54
4. Pull the hopper lift lever into the
Up
position
and raise the hopper to the desired height.
FOR SAFETY: When using machine,
make sure adequate clearance is
available before raising hopper.
NOTE: Be aware that the minimum ceiling height
needed to high dump the hopper is 2745 mm
(9 ft.).
5. Release the hopper lift lever up and into the
middle (Hold) position.
FOR SAFETY: When using machine,
move machine with care when hopper is
raised.
6. Drive the machine up to the debris
container.
7. Lower the hopper into the debris container to
control dust.
8. Push the hopper door lever into the
Open
position and leave it there.
9. Raise the hopper enough and/or close the
hopper door to clear the top of the debris
container.
10. Slowly back the machine away from the
debris site or debris container.
For Safety: When using machine, use
care when reversing machine.
07999
