OPERATION
29
7100 330690 (9--09)
5. CONVENTIONAL SCRUBBING: Open the
solution tank cover. Measure and pour in the
correct amount of detergent. Fill the rest of
the solution tank with water up to the FULL
line near the top of the tank.
NOTE: Floor conditions, water condition, amount
of soilage, type of soilage, and brush pressure all
play an important role in determining the type and
concentration of detergent used. For specific
recommendations, contact your Tennant
representative.
WARNING: Flammable materials can
cause an explosion or fire. Do not use
flammable materials in tank(s).
FOR SAFETY: When using machine,
follow mixing and handling instructions
on chemical containers.
6. ES (option): Fill the recovery tank with water
and detergent up to the lower sensor float to
extend scrub time. Make sure the ES
system is on.
WARNING: Flammable materials can
cause an explosion or fire. Do not use
flammable materials in tank(s).
FOR SAFETY: When using machine,
follow mixing and handling instructions
on chemical containers.
NOTE: If you
DO NOT
want to use the ES mode
(option),
DO NOT
put water in the recovery tank
and make sure the ES system is off.
7. FaST or
ec--H2O
SCRUBBING: Open the
solution tank cover and fill the solution tank
with clear cool water only.
NOTE: When cleaning using the FaST or
ec- H2O option, USE CLEAR COOL WATER
ONLY. DO NOT add cleaning agents in
solution tank. Conventional cleaning
agents/restorers may cause failure to the
system.
8. Lower the tank cover.
