OPERATION
35
810 Gas/LPG 330160 (3--07)
HOW THE MACHINE WORKS
The steering wheel controls the direction of
machine travel. The directional pedal controls the
speed and forward/reverse direction. The brake
pedal slows and stops the machine.
The side brush sweeps debris into the path of the
main brush. The Power Throw brush is used to
help pick up bulky debris. The main brush sweeps
debris from the floor into the hopper. The vacuum
system pulls dust and air through the hopper and
the hopper dust filters.
When sweeping is finished, clean the hopper dust
filter and empty the hopper.
PRE-OPERATION CHECKLIST
-
Check the engine oil level.
-
Check the engine coolant level.
-
Check the windshield washer fluid level
(when applicable).
-
Check the radiator and hydraulic cooler fins
for debris.
-
Check the hydraulic fluid level
-
Check the air filter indicator.
-
Check the skirts and seals for damage and
wear.
-
Check the condition of the sweeping
brushes. Remove any string, banding,
plastic wrap, or other debris wrapped
around them.
-
Check the sweeping brush patterns for
adjustment.
-
Check the condition of the hopper dust filter
and seals. Clean as required.
-
Check the brakes and steering for proper
operation.
-
Check the fuel level
-
Empty the debris hopper.
-
Check the service records to determine
maintenance requirements.
351081
