MAINTENANCE
810 Gas/LPG 330160 (9--97)
74
4. Remove the four retaining screws from the
filter shaker frame.
5. Pull the filter shaker frame out of the hopper.
6. Carefully turn over the shaker frame and
element.
7. Loosen the four filter retaining screws from
the shaker frame.
8. Remove the retainer ring from the shaker
frame. Remove the filter.
9. Make sure the prescreen wrap is tightly
wrapped around and securely fastened on
the new filter element. Put the new filter on
the filter shaker frame.
10. Place the retainer ring over the filter. Make
sure the retaining ring fits inside the lip of
the filter element all the way around. Line up
the slots on the retainer ring with the
retaining screws holes.
11. Mount using the retaining screws.
12. Check the seal on the shaker frame for
damage. Make sure the vibration isolators
are mounted in all four corners of the filter
shaker frame.
13. Put the filter and shaker frame in the hopper.
14. Install the four retaining screws and tighten.
15. Connect the shaker motor wire connectors.
08591
08592
08593
