OPERATION
27
810D MM310 (8--93)
CIRCUIT BREAKERS
The circuit breakers are resetable electrical circuit
protection devices. Their design stops the flow of
current in the event of a circuit overload. Once a
circuit breaker is tripped, it must be reset
manually. Press the reset button after the breaker
has cooled down.
If the overload that caused the circuit breaker to
trip is still there, the circuit breaker will continue to
stop current flow until the problem is corrected.
The circuit breakers are located in the operator
compartment.
The chart lists the circuit breakers and the
electrical components they protect.
Circuit
Breaker
Rating
Circuit Protected
CB-1
15 A
Horn
CB-2
15 A
Filter shaker
CB-3
15 A
Controls
CB-4
15 A
Instrument panel
CB-5
15 A
Hazard light
CB-6
2.5 A
Brushes
CB-7
15 A
Left side brush option
CB-8
15 A
Accessories
CB-9
15 A
Accessories
GLOW PLUGS LIGHT
The glow plugs light
comes on when the
ignition switch is turned clockwise to the start
position. The light will go out when the engine is
ready to start, usually 5 to 15 seconds depending
on the weather conditions.
08440
08927
