EN
-
Using the “SELECT” button, select the most
VXLWDEOH VROXWLRQ ÀRZ DFFRUGLQJ WR WKH W\SH RI
washing operation in hand. The following operating
modes can be selected:
-
Begin cleaning, manoeuvring the machine by
turning the steering wheel and depressing the
pedal to set the machine in motion: front part of
the pedal for forward, rear part for reverse.
-
67$1'$5'²WKHVROXWLRQÀRZFDQEHPRGL¿HG
using the “+” and “-” buttons.
-
$8720$7,& ² WKH VROXWLRQ ÀRZ LV VHW E\ WKH
machine according to the ground speed.
-
(&2120<²WKHVROXWLRQÀRZUDWHLV¿[HGDWWKH
lowest level.
-
CHEM DOSE: this enables the CHEM DOSE
function (optional). To activate CHEM DOSE
mode, the “SELECT” button must be pressed
and held until the red Led alongside the CHEM
DOSE option lights up. To change the percentage
RI GHWHUJHQW LQ WKH VROXWLRQ WKH ÀRZ RSWLRQV
(STANDARD, AUTOMATIC, ECONOMY) must
¿UVW EH GLVDEOHG E\ SUHVVLQJ WKH ³6(/(&7´
button repeatedly until only the CHEM DOSE
Led remains alight; at this point the quantity of
detergent can be varied by means of the “+” and
“-” buttons; the value (%) set in this way appears
in the display. Once the percentage of detergent
KDVEHHQVHWWKHDSSURSULDWHW\SHRIVROXWLRQÀRZ
must be selected (STANDARD, AUTOMATIC,
ECONOMY) using the “SELECT” button. To
disable the CHEM DOSE function, press and
hold the “SELECT” button for at least 5 seconds
until the Led alongside the CHEM DOSE option
extinguishes.
-
The maximum operating speed can be set by
turning the speed potentiometer.
! NOTICE
Whenever the machine moves in reverse, the
squeegee is raised automatically to prevent any
possible damage.
! DANGER: Never use the machine to clean up
ÀDPPDEOHRUH[SORVLYHOLTXLGVHJSHWUROIXHO
oil, etc.), acids or solvents (e.g. paint thinners,
acetone etc.) even if diluted.
To bring the machine to a halt, release the pedal. When
the machine comes to a stop, the cleaning functions are
deactivated and the parking brake is applied.
7XUQWKHLJQLWLRQNH\WRVZLWFKRႇWKHPDFKLQH
0,2
1
2
0,2
1
2
21