English
EN
Tennant T300e (07- 2022)
17
8. Clean the outside surface of the machine with an
all purpose cleaner and damp cloth (Figure 34).
FIG. 34
9. Charge batteries (Figure 35). See BATTERIES.
FIG. 35
AFTER WEEKLY USE
1. Check the electrolyte level in all batteries (Figure
36). See BATTERIES.
FIG. 36
2. Remove the drip trap cover from the squeegee
assembly and clean reservoir (Figure 37).
FIG. 37
AFTER EVERY 50 HOURS OF USE
1. Remove the solution tank filter and clean screen
(Figure 38). Turn the filter bowl counter-clockwise
to remove. Make sure to drain solution tank before
removing filter.
FIG. 38
2. Inspect and clean the seal on the recovery tank lid
(Figure 39). Replace seal if damaged.
FIG. 39
ELECTRIC MOTORS
Replace motor carbon brushes as indicated. Contact
trained personnel for carbon brush replacement.
Carbon Brush Replacement
Hours
Vacuum motor
750
Disk brush motor
1250
