EN
English
Tennant T300e (07- 2022)
8
MACHINE SYMBOLS
Solution flow
Circuit breaker
Do not lift by accessory rail
No step
Battery charge
On
Off
No Solution flow
HOW THE MACHINE WORKS
Water and detergent mixture from the solution tank
flows to the floor and the rotating brush scrubs the floor
clean. As the machine moves forward, the squeegee
with vacuum suction picks up the dirty solution from the
floor into the recovery tank.
BRUSH AND PAD INFORMATION
For best cleaning results use the appropriate brush or
pad for your cleaning application. Listed below are
brushes and pads and the applications for which each
is best suited.
NOTE: The amount and type of soilage play an
important role in determining the type of brush or pad
to use. Contact a Tennant representative for specific
recommendations.
Soft nylon bristle scrub brush (White) -
Recommended for cleaning coated floors without
removing finish. Cleans without scuffing.
Polypropylene bristle scrub brush (Black)
-
This general purpose polypropylene bristle scrub brush
is used for scrubbing lightly compacted soil. This brush
works well for maintaining concrete, wood and grouted
tile floors.
Super abrasive bristle scrub brush (Gray) -
Nylon fiber impregnated with abrasive grit to remove
stains and soil. Strong action on any surface. Performs
well on buildup, grease, or tire marks.
Polishing pad (White) -
Used to maintain highly polished or burnished floors.
Buffing pad (Red) -
Used for light duty scrubbing
without removing floor finish.
Scrubbing pad (Blue) -
Used for medium to
heavy-duty scrubbing. Removes dirt, spills, and scuffs
and leaves surface clean ready for recoating.
Stripping pad (Brown) -
Used for stripping of floor
finish to prepare the floor for recoating.
Heavy duty stripping pad (Black) -
Used for
aggressive stripping of heavy finishes/sealers, or very
heavy duty scrubbing.
Surface preparation pad (Maroon) -
Used for very
aggressive chemical free removal of floor finish to
prepare the floor for re-coating
