42
T380AMR 9020999 (08-2020)
OPERATION
7. To remove or reorder cleaning routes, deselect
a cleaning route by selecting it again. The
cleaning route number will grey out and all of
the other selected routes will renumber.
8. Select the cleaning route again and it will be
added and renumbered as the last route to run.
9. If necessary, adjust the scrub settings for the
area(s) to be scrubbed. See SETTING SCRUB
MODES.
NOTE: The machine does not save solution
fl
ow
and brush pressure settings for a robotic route,
as these needs may change from day-to-day.
Determine cleaning requirements for the area(s)
being cleaned and adjust solution
fl
ow and brush
pressure settings as necessary.
10. Remove the key from the
ON/OFF key switch
.
FOR SAFETY: While machine is operating in
robotic mode, remove key from ON/OFF key
switch to prevent unauthorized use without
disrupting robotic route.
11. The
UI touchscreen
displays TO START with
instructions to
1. Secure the yellow safety
straps. 2. Push the Start/Pause button in
the back.
The
UI touchscreen
also displays a
rotating machine image that shows securing
the yellow safety straps and highlighting the
blue start/pause button
on the back of the
machine.
