57
T380AMR 9020999 (08-2020)
OPERATION
Assists
Cause(s)
Symbol
Additional
Indicator(s)
Remedy
208
NO BRUSH
ERROR
No brushes installed.
Brushes not properly
installed.
Brush pressure
indicator lights and
1-Step button LED
fl
ash.
1. Make sure brushes or pads are
properly installed.
2. If there are no issues, press the
BLUE Start/Pause button in the back
to resume.
3. If issue continues, contact
Customer Service.
209
SEAT SENSOR
TRIGGERED
Person or object on
operator seat while
machine is in robotic
mode.
N/A
1. Check that the seat is clear.
2. Press rear BLUE Start/Pause
button to start.
215
SENSOR
CHECK IN
PROGRESS
Sensors are scanning
the area.
N/A
1. Drive the machine 10-15 feet along
the path..
2. To resume, press the BLUE Start/
Pause button.
216
PATH IS
BLOCKED
Obstacle(s) on
cleaning route.
N/A
1. Make sure the robot’s path is clear
or drive past any obstacles.
2. Press rear BLUE Start/Pause
button to start.
217
POTENTIAL
HAZARD
DETECTED
Sensors identi
fi
ed a
potential hazard.
N/A
1. Inspect the machine.
2. Make sure the path of the machine
is clear or drive past any obstacles.
3. If the path is clear, press the BLUE
Start/Pause button to resume.
218
STEERING
ERROR
Steering electronic/
mechanical issue.
N/A
1. Turn off the machine.
2. Wait 15 seconds.
3. Turn on the machine.
4. If issue persists, contact Customer
Service.
219
PATH IS
BLOCKED
Obstacle(s) on
cleaning route.
N/A
1. Make sure path is clear.
2. Drive past any obstacles.
3. To resume, press the BLUE Start/
Pause button.
222
PEDAL
PRESSED
Pedal has been
pressed while in
robotic mode.
N/A
1. Make sure the pedal is clear.
2. Press the rear BLUE Start/Pause
button.
223, 224, 225
SENSOR
ERROR
Dirty, smudged, or
damaged sensor(s).
N/A
1. Clean all the sensors with a clean
micro
fi
ber cloth.
2. Inspect for damage and
obstructions.
3. If no issues are found, press the
BLUE Start/Pause button to resume.
300, 301
ROBOT IS OFF
PATH
Machine is off
designated scrubbing
path.
N/A
1. Follow the blue arrow and drive to
the red path.
2. When correct, the path will turn
white.
3. Press rear BLUE Start/Pause
button to start.