76
T380AMR 9020999 (08-2020)
MAINTENANCE
SQUEEGEE BLADES
Check the squeegee blades for damage and wear
daily. When the blades become worn, rotate the
blades end-for-end or top-to-bottom to a new
wiping edge. Replace blades when all edges are
worn.
Check the de
fl
ection of the squeegee blades daily
or when scrubbing a different type of surface.
Check the leveling of the rear squeegee every 50
hours of operation.
The rear squeegee assembly can be removed
from the squeegee pivot to prevent damage during
transport of the machine.
REPLACING (OR ROTATING) THE SQUEEGEE
BLADES
1. Stop machine on a level surface. Make sure
the scrub head is in the raised position.
2. Turn the machine ON/OFF key switch off.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
3. Rotate the squeegee assembly to the right
side of the machine and loosen the hook-and-
loop fastener securing the vacuum hose to the
squeegee assembly.
4. Disconnect the vacuum hose from the
squeegee assembly.
5. Squeeze the squeegee retainer lever and
remove the squeegee assembly from the
machine.
6. Fully loosen the four knobs on squeegee
assembly. This will separate the spring loaded
blade retainer from squeegee frame.
