80
T380AMR 9020999 (08-2020)
MAINTENANCE
TIRES
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
The machine has three solid rubber tires: one tire
is front and two are in the rear. Check the tires
for damage and wear after every 500 hours of
operation.
PUSHING, TOWING, AND
TRANSPORTING THE MACHINE
PUSHING OR TOWING THE MACHINE
If the machine becomes disabled, it can be pushed
from the front or rear, but only tow it from the front.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
Before attempting to push or tow the machine,
disengage the brake as described below.
To disengage the brake, insert the tip of a small
screw driver between the brake release lever and
the body of the encoder.
Only push or tow the machine for a very short
distance and do not exceed 3.2 kp/h (2 mph). It
is NOT intended to be pushed or towed for a long
distance or at a high speed.
NOTE:
Do Not
push or tow machine for a long
distance or damage may occur to the propelling
system.
Immediately after pushing the machine, remove
the screw driver from between the brake release
lever and the body of the encoder. NEVER operate
the machine with the parking brake disabled.
FOR SAFETY: Do not operate machine with the
brake disabled.