81
T380AMR 9020999 (08-2020)
MAINTENANCE
TRANSPORTING THE MACHINE
When transporting the machine by trailer or truck,
be certain to follow the tie-down procedure below:
FOR SAFETY: When loading/unloading
machine onto/off truck or trailer, drain tanks
before loading machine.
1. Raise the squeegee and scrub head.
2. Remove the rear squeegee from the machine.
3. Remove the hardware securing the front
perimeter guard from the front perimeter guard
brackets and remove the front perimeter guard
from the machine.
FOR SAFETY: When loading/unloading
machine onto/off truck or trailer, use ramp,
truck or trailer that will support the weight of
the machine and operator.
FOR SAFETY: When loading/unloading
machine onto/off truck or trailer, do not load/
unload on ramp inclines that exceed 15.8% / 9°
grade.
NOTE: The machine ability to climb a ramp is
affected by tire wear, ramp surface, weather
conditions, and other factors. Trailering should
only be performed by personnel trained on how to
safely load a machine.
4. Drive the machine onto the trailer or truck.
Position the machine so the weight of the
machine is safely distributed and can be safely
strapped down to the trailer or truck.
5. Lower the scrub head and squeegee after the
machine is positioned on the trailer or truck.
6. Turn off the machine.
7. Place a block behind each wheel to prevent
the machine from rolling.
8. Remove the lower rear shroud from the
machine.
