PLDC04453
REVISION 00
December 23, 2020
TECHNICAL OFFICE
Stavale
12
Disconnect the two motors electrically between each other, both the power supply and the thermals.
14
Tip over the head and dismantle drive disk/disks
O
.
15
Unscrew the bolt
P
that fastens the drive to the shaft.
16
Lift the drive
O
, with the help of a hammer plastic or a puller.
17
Pay attention to the tab
Q
that holds the disk to the shaft.
18
Unscrew the seven bolts
R
(on each motor) that fasten the reduction drive to the head plate.
19
Replace the reduction drive with a new one.
O
P
Q
R
O
Fig. 18
Q
Fig. 17
Fig. 19
10 of 73