Page 9 of 9
KIT NO. 9006828
T5e
ec-H2O
Kit
INSTALLATION INSTRUCTIONS --
Continued
9006829 Rev. 00 (12--09)
Tennant Company
Customer Service: (800) 553--8033 or (763) 513--2850
INSTALL
ec- H2O
HORN:
1. Connect the routed
ec--H2O
wire harness to horn
[p/n 1018505] as shown. Using screw and lock
washer supplied with horn, attach the horn
bracket [p/n 1044192] to horn (Figure 47).
Horn Bracket
[p/n 1044192]
Horn
[p/n 1018505]
ec--H2O
Wire Harness
Fig. 47
2. Using two M6x1.00x16 sems hex screws
[p/n 1034731], attach the horn to the machine as
shown (Figure 48).
2 -- M6x1.00x16
Sems Screws
Fig. 48
3. Secure the horn wire harness with wire--tie as
shown (Figure 49).
Wire--Tie
Horn Wire Harness
Fig. 49
4. Replace the scrub head and the batteries.
INSTALL
ec- H2O
MODEL LABELS:
Apply the new
ec--H2O
labels as described below
(Figure 50).
Label, ec--H2O, Front
[p/n 1050008]
Label, ec--H2O, Side
[p/n 1050001 Qty2]
Label, NFSI
[p/n 1025660]
Label, Attention Fill,
ec--H2O [p/n 1050003]
NOTE: Machine may
have tick marks to
position label.
Label
Tick mark
Tick Marks
Fig. 50
OPERATE
ec- H2O
SYSTEM:
To ensure proper operation, operate the
ec--H2O
system according to T5e
ec--H2O
Operator Manual.
Home
Find...
Go To..
