OPERATION
Tennant T5e (03--08)
11
5. Check the scrub head to ensure that it is properly
adjusted (See ADJUSTING SCRUB HEAD
BRUSHES).
Cylindrical Brush Model:
1. Raise scrub head off the floor and remove key.
2. Remove idler plate from scrub head by pressing
the spring tab downward (Figure 11).
FIG. 11
3. Attach idler plate to the brush end that has the
double row of bristles (Figure 12). Install brush.
Double row of
bristles
FIG. 12
4. Check the brushes to ensure they are properly
adjusted (See ADJUSTING SCRUB HEAD
BRUSHES).
INSTALLING FaST--PAK CARTON (FaST Model)
ATTENTION: The FaST--PAK Concentrate Formula
is specifically designed for the FaST system.
NEVER use a substitute. Machine damage may
result.
1. Pull out the hose connector from the FaST--PAK
carton and remove cap (Figure 13).
FIG. 13
2. Open the battery compartment. Connect the
FaST--PAK carton to the supply hose and place
carton in compartment (Figure 14).
Make sure the
hose does not get pinched.
FIG. 14
3. When the supply hose is not in use, connect the
storage plug to prevent the FaST system from
drying out and clogging up the hose. (Figure 15).
FIG. 15
