OPERATION
Tennant T600 EE (04-2018)
15
4. Turn the water supply on. The water flow will
automatically stop when solution tank is full.
FOR SAFETY: When operating machine, do not
leave machine unattended when filling solution
tank with auto-fill feature.
5. After solution tank is full, turn water supply off.
6. Turn collar on coupler counter-clockwise to unlock
connection. Then simply pull back on coupler to
disconnect hose from machine (Figure 21).
FIG. 21
7. Remove the quick-disconnect auto-fill coupler from
the water supply hose and store in a safe location.
ACCESSORY RAILS
The machine is equipped with two accessory rails
which straddle the control console. An optional
accessory rail clip allows for storage of wet floor signs,
spray bottles, debris bags and other items (Figure 22).
FIG. 22
To install the accessory rail clip, hook the clip over the
rail and push downward until it snaps into position. To
remove clip, reach under clip and carefully pull the latch
tab downward to release from rail (Figure 23).
FIG. 23
ATTENTION:
Do not use the accessory
rails to lift machine, damage may occur.
ATTENTION:
Do not step on accessory
rails, damage may occur.