MAINTENANCE
26
Tennant T600 EE (04-2018)
MACHINE MAINTENANCE
To keep the machine in good working condition, simply
perform the following maintenance procedures.
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine and remove
key.
FOR SAFETY: When servicing machine wear
personal protection equipment as needed. All
repairs must be performed by trained personnel
YELLOW TOUCH POINTS
This machine is equipped with easy to find yellow touch
points for simple service items. A few examples shown
below (Figure 47). No tools are required to perform
these maintenance operations.
FIG. 47
AFTER DAILY USE
1. Drain and rinse out the recovery tank (Figure 48).
See DRAINING TANKS.
FIG. 48
2. Remove the debris tray and empty (Figure 49).
Reinstall tray after cleaning.
FIG. 49
3. Remove and clean the float shut-off screen (Figure
50). Reinstall screen after cleaning.
FIG. 50
4. Drain and rinse out the solution tank (Figure 51).
FIG. 51
