MAINTENANCE
28
Tennant T600 EE (04-2018)
AFTER WEEKLY USE
1. Check the electrolyte level in each battery cell
(Figure 58). See BATTERIES.
NOTE: If machine is equipped with the automatic or
manual battery watering system, See BATTERIES.
FIG. 58
2. Check for liquid in the battery compartment.
(Figure 58). See BATTERY COMPARTMENT
DRAIN HOSE for further details.
FIG. 59
3. Remove the drip trap cover from the squeegee
assembly and clean reservoir (Figure 60).
FIG. 60
AFTER EVERY 50 HOURS OF USE
1. Drain solution tank. Remove the solution tank filter
and clean screen (Figure 61). Turn the filter bowl
counter-clockwise to remove.
FIG. 61
2. Inspect and clean the seal on the recovery tank lid
(Figure 62). Replace seal if damaged.
FIG. 62
3. Check tire pressure if equipped with the pneumatic
(air-filled) tires (Figure 63). The proper tire pressure
is 60 to 65 psi (415 to 450 kPA).
FIG. 63
