167
T600/T600e 9016605 (04-2018)
SERVICE
2. Turn OFF the machine and remove the key.
3. Remove the brushes from the scrub head.
4. Turn ON the machine, completely lower the scrub
head to the fl oor, turn OFF the machine, and
remove the key.
5. Disconnect the battery cable from the machine.
FOR SAFETY: When servicing machine, Disconnect
battery connection and charger cord before
working on machine.
6. Remove the front scrub head cover from the
machine.
7. Cut the cable ties from the main wire harness /
brush motor connection and disconnect the main
wire harness from the brush motors.
8. Disconnect all solution supply hoses from the scrub
head.
9. Cut all wire ties securing the main wire harness to
the scrub head and disconnect main wire harness
connections from the brush drive motors.
10. Remove the cotter pin and clevis pin securing the
actuator to the head suspension spring bracket.
NOTE: Do Not turn the actuator barrel after removing
the cotter pin / clevis pin securing the actuator to the
head suspension spring bracket. The actuator must
be readjusted if the barrel is turned out of adjustment.
See
REMOVING / REPLACING / ADJUSTING THE
ACTUATOR
for instructions how to readjust the
actuator.
11. Remove the cotter pins and clevis pins securing
the head lift arms to the scrub head assembly.
12. Remove the clevis pin and cotter pin securing the
scrub head pivot to the head guide bracket.
13. Reinstall the removed scrub head / install the new
scrub head onto the machine in the reverse order
of disassembly.
14. Adjust the scrub head. See CHECKING /
ADJUSTING THE CYLINDRICAL SCRUB BRUSH
PATTERN.
15. If removed scrub head was replaced with new
orbital scrub head, reconfi gure the machine for the
orbital scrub head. See RECONFIGURING THE
MACHINE AFTER NEW HARDWARE / OPTION
INSTALLATION.
Summary of Contents for T600e
