27
T7AMR 9018134 (12-2021)
OPERATION
6. Release the
propel pedal
to stop the machine.
Scrubbing functions stop and the automatic
park brake will engage when the machine
stops.
The
brake pedal
can be used to control the
machine if quicker stopping is needed or
if operating on an incline. Do not operate
machine on inclines exceeding 7% (4°) when
scrubbing.
FOR SAFETY: When using machine in manual
mode, go slowly on inclines and slippery
surfaces.
7. Press the
1-Step button
to stop scrubbing. The
light in the
1-Step button
will turn off and the
scrubbing functions will turn off after a short
delay.
DOUBLE SCRUBBING
NOTE: Double scrubbing is available in Manual
Mode only.
Do Not
operate the machine on an
autonomous cleaning route with the squeegee in
the raised (double scrub) position.
For heavily soiled areas, use the double scrubbing
method.
Double scrubbing can be performed using the
ec-H2O
SCRUBBING SYSTEM (option) or
CONVENTIONAL SCRUBBING methods.
Before double scrubbing, remove the side
squeegees to keep them from channeling water
while double scrubbing. To remove the side
squeegees, lower the scrub head, then pull the
pins on the front and rear ends of the squeegees.
To double scrub, press the
1-Step button
, then the
vacuum fan button
. The light above the v
acuum
fan button
will turn off, the squeegee will raise and
the vacuum fan will stop operating. Then scrub the
area.
Let the cleaning solution set on the floor for 3-5
minutes.
