42
T7AMR 9018134 (12-2021)
OPERATION
7. To remove or reorder cleaning routes, deselect
a cleaning route by selecting it again. The
cleaning route number will grey out and all of
the other selected routes will renumber.
8. Select the cleaning route again and it will be
added and renumbered as the last route to run.
9. If necessary, adjust the scrub settings for the
area(s) to be scrubbed. See SETTING SCRUB
MODES.
NOTE: The machine does not save solution flow
and brush pressure settings for a robotic route,
as these needs may change from day-to-day.
Determine cleaning requirements for the area(s)
being cleaned and adjust solution flow and brush
pressure settings as necessary.
10. Remove the key from the
ON/OFF key switch
without turning the key to the off position. This
will not disrupt the robotic route and prevent
the key from being stolen or lost.
11. The
UI touchscreen
displays TO START with
instructions to
1. Secure the yellow safety
straps. 2. Push the Start/Pause button.
The
UI touchscreen
also displays a rotating
machine image that shows securing the yellow
safety straps and highlighting the
blue start/
pause button
on the back of the machine.
