86
T7AMR 9018134 (12-2021)
MAINTENANCE
REPLACING THE SIDE SQUEEGEE BLADES
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
1. When changing the left side squeegee only:
Remove the pin from the left perimeter guard
and open the left perimeter guard to access
the squeegee.
2. Open the side squeegee.
3. Pull the old side squeegee blade from the side
squeegee retainer. Slide the new blade onto
the retainer.
4. Close the side squeegee.
5. If the side squeegee located on the left side of
the machine was changed: Close and resecure
the left perimeter guard.
ADJUSTING THE SQUEEGEE GUIDE ROLLER
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
The squeegee guide rollers are located on both
ends of the rear squeegee. The rollers guide the
squeegee blade end along a wall. Loosen the nut
located at the top of the guide roller and move the
roller in or out to adjust how close the end of the
squeegee blade is to the wall. The squeegee blade
end should be further away from the wall when the
floor curves up into the wall.
