91
T7AMR 9018134 (12-2021)
MAINTENANCE
4.
Drive the machine onto the trailer or truck.
Position the machine so the weight of the
machine is safely distributed and can be safely
strapped down to the trailer or truck.
5. Lower the scrub head and squeegee after the
machine is positioned on the trailer or truck.
6. Turn off the machine.
7.
Place a block behind each wheel to prevent
the machine from rolling.
8.
Hook the tie-down straps to the stabilizer arms
and then secure the tie-downs to the trailer or
truck to prevent the machine from tipping.
Do Not
wrap the tie-down straps around the
lower LIDAR sensor or route the tie-down
straps over the front of the LIDAR sensor.
NOTE: It may be necessary to install tie-down
brackets to the floor of the trailer or truck.
FOR SAFETY: When loading/unloading
machine onto/off truck or trailer, use tie-down
straps to secure machine.
9. Route the rear tie-down straps through the
opening at the center part of the rear axle and
secure the tie-downs to the trailer or truck to
prevent the machine from tipping.
10. Ensure all tie-down straps are fully tightened
and machine is completely secure on the
trailer or truck.
11.
Stow/secure all parts removed from the
machine in a safe place where they will not be
lost or damaged.