23
T7AMR 9018134 (12-2021)
OPERATION
BRUSH INFORMATION
For best results, use the appropriate brush or
pad for the cleaning application. Listed below are
brushes and pads and the applications for which
each is best suited.
NOTE: The amount and type of soilage play an
important role in determining the type of brush or
pad to use. Contact a Tennant representative for
specific recommendations.
Polypropylene brush
- General purpose
polypropylene bristles lift lightly compacted dirt
without scuffing high-gloss coated floors.
Nylon brush
- Softer nylon bristles are
recommended for scrubbing coated floors. Cleans
without scuffing.
Super AB brush
- Nylon fiber with an abrasive grit
to remove stains and compacted dirt Aggressive
action on any surface. Performs well on buildup,
grease, or tire marks.
Stripping pad (Brown)
- For stripping of floor
finish to prepare the floor for recoating.
Scrubbing pad (Blue)
- For medium to heavy-
duty scrubbing. Removes dirt, spills, and scuffs.
Buffing pad (Red)
- For light duty scrubbing
without removing floor finish.
Polishing pad (White)
- For maintaining highly
polished or burnished floors.
High productivity stripping pad (Black)
- For
aggressive stripping of heavy finishes or sealers,
or for very heavy duty scrubbing. This pad can
only be used with the grip pad driver, not the tufted
pad driver.
Surface preparation pad (Maroon)
- For very
aggressive chemical free removal of floor finish to
prepare the floor for re-coating
Grip pad driver
- The grip-face backing allows
pads to be fully used and holds pads in place
without penetrating the pad. The spring-activated
centering device works with all Tennant pads and
allows for fast, easy pad replacement.
Tufted pad driver
- Standard pad driver has short
bristles, or “tufts,” on the back to hold the pad in
place. This driver works with all Tennant pads
except the black high productivity pad.
