24
T7AMR 9018134 (12-2021)
OPERATION
MACHINE OPERATION
PRE-OPERATION CHECKLIST
F
Check the machine for fluid leaks.
F
Check the battery fluid and charge level.
F
Check the tank cover seals for damage and
wear.
F
Clean the vacuum fan inlet filter.
F
Check the condition of the scrubbing brushes.
Remove any string, banding, plastic wrap, or
other debris wrapped around them.
F
Check the squeegees for damage, wear and
for deflection adjustment.
F
Check the left perimeter guard, right perimeter
guard, front perimeter guard, and perimeter
guard bristles for debris, damage, and wear.
Be sure the left perimeter guard is closed and
secured closed with the clevis pin.
F
Check the vacuum hose for debris or
blockage.
F
Drain and clean the recovery tank.
F
Check the brakes and steering for proper
operation.
F
Check the service records to determine
maintenance requirements.
F
Check the front and side 2D and 3D cameras
and the upper and lower LIDAR sensors
for dirt, dust, and smudges. Use provided
microfiber cloth to clean all cameras and
LIDAR sensors.
F
Check the horn, headlights, taillights, safety
lights, and audible alarms (if equipped).
F
For
ec-H2O
Scrubbing:
Ensure that all
conventional cleaning agents are drained and
rinsed from the solution tank.
F
For
ec-H2O
Scrubbing:
Ensure that the
solution tank is filled with clear cool water only.