30
T7AMR 9018134 (12-2021)
OPERATION
LOGGING INTO BrainOS
A PIN (Personal Identification Number) is required
to log in to BrainOS when the machine is initially
turned on or after 3 minutes (180 seconds) of no
touch activity on the
UI touchscreen
. This is to
ensure that only authorized personnel can access
and use the BrainOS robotic functionality.
1. Turn the
ON/OFF key switch
on. Allow the
BrainOS to start up (approximately 1 minute).
2. Once the BrainOS loads the UI touchscreen
displays a series of maintenance reminders.
3. Read and perform the maintenance reminders.
4. Use the
UI touchscreen
keypad to enter
security four-digit PIN (Personal Identification
Number).
5.
Upon successful PIN (Personal Identification
Number) entry, the UI touchscreen displays an
Escalator Warning.
6. Read and perform the tasks on the Escalator
Warning and then push CONFIRM
7. The
UI touchscreen
displays the main menu.