IB 9006790 (07--2010)
4
14. Use saved hex screws to install the right rear
guard (3) onto the right drive support housing.
Refer to Fig. 5.
15. Reinstall the right rear tire onto the machine.
16. Remove the jack stands from underneath the
machine and lower the machine to the floor.
17. Check the hydraulic fluid level. If necessary,
add hydraulic fluid to the system.
18. Start and test the machine. Observe the
replaced hydraulic components and hose
connections for leaks.
3
Right drive
support housing
Saved hex
screws
FIG. 5
Bill of Materials for Wheel Kit, RH, Replmt (4X) -- 9006789
Ref.
Tennant
Part No.
Description
Qty.
o
9006789
)
Wheel Kit, RH, Replmt (4X)
1
Y
1
1047806
Tube, Hyd, Right Outside
1
Y
2
1047720
Tube, Hyd, Right Inside
1
Y
3
1047929
Guard, Rear, RH (4--Wheel)
1
Y
4
367113
Hose, Hyd, Med04, JF04Str/JF04Str, 051.0
1
Y
5
1048061
)
Bracket, Support, Tube
1
Y
6
1048084
Spacer, 0.35B, 1.50D, 0.25L, PL
1
Y
7
09570
Clamp, Cable, Stl, 0.9X1.8X0.62W, 1 Hole
1
Y
8
39277
Screw, Hex, M8 X 1.25 X 25, 8.8
1
Y
9
32491
Washer, Flat, 0.31, Std
1
Y
10 07791
)
Nut, Hex, Flng, M8 X 1.25
1
TENNANT COMPANY
P. O. Box 1452
Minneapolis, MN 55440-1452
